And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.291
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.826
And
I accept adding "cowsay" to Additional Software
3.707
And
Additional Software is correctly configured for package "cowsay"
0.694
And
I shutdown Tails and wait for the computer to power off
8.137
And
I start Tails from USB drive "__internal" with network unplugged
37.028
And
I enable persistence
6.347
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.047
And
I log in to a new session
9.582
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.185
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
I prepare the Additional Software upgrade process to fail
0.044
And
the network is plugged
0.014
And
available upgrades have been checked
2.149
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.468
And
I can open the Additional Software configuration window from the notification
2.556
And
I shutdown Tails and wait for the computer to power off
17.656
And
I start Tails from USB drive "__internal" with network unplugged
38.031
And
I enable persistence
5.843
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
11.640
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.239
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.031
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.069
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.060