And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:27.821
And
I configure APT to prefer an old version of cowsay
0.007
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.129
And
I accept adding "cowsay" to Additional Software
4.775
And
Additional Software is correctly configured for package "cowsay"
0.792
And
I shutdown Tails and wait for the computer to power off
7.659
And
I start Tails from USB drive "__internal" with network unplugged
40.634
And
I enable persistence
10.544
And
I configure APT to prefer an old version of cowsay
0.007
And
I disable the tails-virt-notify-user.service user unit
0.068
And
I log in to a new session
10.854
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.664
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
I prepare the Additional Software upgrade process to fail
0.056
And
the network is plugged
0.013
And
available upgrades have been checked
2.225
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.530
And
I can open the Additional Software configuration window from the notification
2.599
And
I shutdown Tails and wait for the computer to power off
13.296
And
I start Tails from USB drive "__internal" with network unplugged
40.580
And
I enable persistence
14.289
And
I configure APT to prefer an old version of cowsay
0.009
And
I log in to a new session
13.196
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.246
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
the network is plugged
0.017
Then
the Additional Software upgrade service has started
0.084
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.132