And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:21.747
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.041
And
I accept adding "cowsay" to Additional Software
4.837
And
Additional Software is correctly configured for package "cowsay"
0.610
And
I shutdown Tails and wait for the computer to power off
8.176
And
I start Tails from USB drive "__internal" with network unplugged
37.630
And
I enable persistence
10.567
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.047
And
I log in to a new session
10.556
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.215
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
I prepare the Additional Software upgrade process to fail
0.051
And
the network is plugged
0.051
And
available upgrades have been checked
1.127
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.201
And
I can open the Additional Software configuration window from the notification
2.589
And
I shutdown Tails and wait for the computer to power off
17.936
And
I start Tails from USB drive "__internal" with network unplugged
38.724
And
I enable persistence
10.722
And
I configure APT to prefer an old version of cowsay
0.008
And
I log in to a new session
11.682
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.205
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.054
And
the network is plugged
0.014
Then
the Additional Software upgrade service has started
0.063
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.097