And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:20.275
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.128
And
I accept adding "cowsay" to Additional Software
5.003
And
Additional Software is correctly configured for package "cowsay"
0.772
And
I shutdown Tails and wait for the computer to power off
4.364
And
I start Tails from USB drive "__internal" with network unplugged
37.171
And
I enable persistence
9.097
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.048
And
I log in to a new session
11.140
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.685
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.063
And
I prepare the Additional Software upgrade process to fail
0.048
And
the network is plugged
0.039
And
available upgrades have been checked
1.093
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.416
And
I can open the Additional Software configuration window from the notification
2.521
And
I shutdown Tails and wait for the computer to power off
22.197
And
I start Tails from USB drive "__internal" with network unplugged
37.946
And
I enable persistence
10.588
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
10.236
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.557
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.072
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.070