And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:23.190
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.257
And
I accept adding "cowsay" to Additional Software
4.825
And
Additional Software is correctly configured for package "cowsay"
0.615
And
I shutdown Tails and wait for the computer to power off
8.181
And
I start Tails from USB drive "__internal" with network unplugged
37.457
And
I enable persistence
10.559
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.059
And
I log in to a new session
10.485
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.215
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
I prepare the Additional Software upgrade process to fail
0.054
And
the network is plugged
0.017
And
available upgrades have been checked
1.183
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.054
And
I can open the Additional Software configuration window from the notification
2.605
And
I shutdown Tails and wait for the computer to power off
12.272
And
I start Tails from USB drive "__internal" with network unplugged
37.587
And
I enable persistence
10.907
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
10.534
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.226
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.040
And
the network is plugged
0.014
Then
the Additional Software upgrade service has started
0.070
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.092