And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:16.180
And
I configure APT to prefer an old version of cowsay
0.032
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.571
And
I accept adding "cowsay" to Additional Software
3.693
And
Additional Software is correctly configured for package "cowsay"
0.536
And
I shutdown Tails and wait for the computer to power off
4.461
And
I start Tails from USB drive "__internal" with network unplugged
35.140
And
I enable persistence
9.316
And
I configure APT to prefer an old version of cowsay
0.007
And
I disable the tails-virt-notify-user.service user unit
0.058
And
I log in to a new session
9.099
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.493
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.042
And
I prepare the Additional Software upgrade process to fail
0.038
And
the network is plugged
0.019
And
available upgrades have been checked
1.085
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.509
And
I can open the Additional Software configuration window from the notification
2.544
And
I shutdown Tails and wait for the computer to power off
13.681
And
I start Tails from USB drive "__internal" with network unplugged
36.344
And
I enable persistence
9.852
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
10.431
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.199
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.042
And
the network is plugged
0.014
Then
the Additional Software upgrade service has started
0.053
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.108