And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:26.437
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.137
And
I accept adding "cowsay" to Additional Software
4.894
And
Additional Software is correctly configured for package "cowsay"
0.769
And
I shutdown Tails and wait for the computer to power off
3.015
And
I start Tails from USB drive "__internal" with network unplugged
39.028
And
I enable persistence
10.568
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.072
And
I log in to a new session
11.282
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.175
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
I prepare the Additional Software upgrade process to fail
0.051
And
the network is plugged
0.018
And
available upgrades have been checked
2.227
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.002
And
I can open the Additional Software configuration window from the notification
2.527
And
I shutdown Tails and wait for the computer to power off
17.027
And
I start Tails from USB drive "__internal" with network unplugged
37.879
And
I enable persistence
10.246
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
12.359
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.193
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
the network is plugged
0.019
Then
the Additional Software upgrade service has started
0.087
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.079