And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:27.755
And
I configure APT to prefer an old version of cowsay
0.015
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.943
And
I accept adding "cowsay" to Additional Software
4.852
And
Additional Software is correctly configured for package "cowsay"
0.812
And
I shutdown Tails and wait for the computer to power off
7.229
And
I start Tails from USB drive "__internal" with network unplugged
39.877
And
I enable persistence
9.339
And
I configure APT to prefer an old version of cowsay
0.022
And
I disable the tails-virt-notify-user.service user unit
0.078
And
I log in to a new session
11.296
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.301
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.070
And
I prepare the Additional Software upgrade process to fail
0.056
And
the network is plugged
0.015
And
available upgrades have been checked
2.201
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.535
And
I can open the Additional Software configuration window from the notification
2.533
And
I shutdown Tails and wait for the computer to power off
18.367
And
I start Tails from USB drive "__internal" with network unplugged
39.541
And
I enable persistence
11.105
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
11.057
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.188
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
the network is plugged
0.019
Then
the Additional Software upgrade service has started
0.054
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.066