And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:23.090
And
I configure APT to prefer an old version of cowsay
0.012
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.073
And
I accept adding "cowsay" to Additional Software
5.105
And
Additional Software is correctly configured for package "cowsay"
0.866
And
I shutdown Tails and wait for the computer to power off
7.135
And
I start Tails from USB drive "__internal" with network unplugged
39.000
And
I enable persistence
10.962
And
I configure APT to prefer an old version of cowsay
0.007
And
I disable the tails-virt-notify-user.service user unit
0.069
And
I log in to a new session
11.957
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.745
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.073
And
I prepare the Additional Software upgrade process to fail
0.096
And
the network is plugged
0.028
And
available upgrades have been checked
1.133
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.508
And
I can open the Additional Software configuration window from the notification
2.704
And
I shutdown Tails and wait for the computer to power off
23.331
And
I start Tails from USB drive "__internal" with network unplugged
38.107
And
I enable persistence
10.684
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
11.738
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.221
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
the network is plugged
0.022
Then
the Additional Software upgrade service has started
0.064
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.070