And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:23.281
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.840
And
I accept adding "cowsay" to Additional Software
4.827
And
Additional Software is correctly configured for package "cowsay"
0.612
And
I shutdown Tails and wait for the computer to power off
2.726
And
I start Tails from USB drive "__internal" with network unplugged
37.844
And
I enable persistence
10.587
And
I configure APT to prefer an old version of cowsay
0.012
And
I disable the tails-virt-notify-user.service user unit
0.066
And
I log in to a new session
10.073
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.199
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.035
And
I prepare the Additional Software upgrade process to fail
0.069
And
the network is plugged
0.020
And
available upgrades have been checked
1.107
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.489
And
I can open the Additional Software configuration window from the notification
2.592
And
I shutdown Tails and wait for the computer to power off
8.765
And
I start Tails from USB drive "__internal" with network unplugged
37.501
And
I enable persistence
10.269
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
11.207
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.180
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.045
And
the network is plugged
0.017
Then
the Additional Software upgrade service has started
0.068
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.102