And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:27.737
And
I configure APT to prefer an old version of cowsay
0.007
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.102
And
I accept adding "cowsay" to Additional Software
4.871
And
Additional Software is correctly configured for package "cowsay"
0.701
And
I shutdown Tails and wait for the computer to power off
7.403
And
I start Tails from USB drive "__internal" with network unplugged
40.019
And
I enable persistence
11.057
And
I configure APT to prefer an old version of cowsay
0.008
And
I disable the tails-virt-notify-user.service user unit
0.073
And
I log in to a new session
11.953
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.232
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
I prepare the Additional Software upgrade process to fail
0.049
And
the network is plugged
0.016
And
available upgrades have been checked
1.095
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.016
And
I can open the Additional Software configuration window from the notification
2.567
And
I shutdown Tails and wait for the computer to power off
18.280
And
I start Tails from USB drive "__internal" with network unplugged
39.528
And
I enable persistence
11.122
And
I configure APT to prefer an old version of cowsay
0.007
And
I log in to a new session
11.391
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.237
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.048
And
the network is plugged
0.015
Then
the Additional Software upgrade service has started
0.062
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.076