And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:19.354
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.317
And
I accept adding "cowsay" to Additional Software
3.593
And
Additional Software is correctly configured for package "cowsay"
0.586
And
I shutdown Tails and wait for the computer to power off
8.108
And
I start Tails from USB drive "__internal" with network unplugged
35.901
And
I enable persistence
10.107
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.053
And
I log in to a new session
9.159
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.205
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
I prepare the Additional Software upgrade process to fail
0.066
And
the network is plugged
0.040
And
available upgrades have been checked
1.165
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.572
And
I can open the Additional Software configuration window from the notification
2.505
And
I shutdown Tails and wait for the computer to power off
17.377
And
I start Tails from USB drive "__internal" with network unplugged
35.933
And
I enable persistence
9.887
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
10.177
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.179
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
the network is plugged
0.017
Then
the Additional Software upgrade service has started
0.060
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.071