And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:22.426
And
I configure APT to prefer an old version of cowsay
0.007
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.606
And
I accept adding "cowsay" to Additional Software
4.896
And
Additional Software is correctly configured for package "cowsay"
0.616
And
I shutdown Tails and wait for the computer to power off
4.170
And
I start Tails from USB drive "__internal" with network unplugged
38.768
And
I enable persistence
10.591
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.061
And
I log in to a new session
10.373
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.242
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
I prepare the Additional Software upgrade process to fail
0.063
And
the network is plugged
0.055
And
available upgrades have been checked
1.148
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.996
And
I can open the Additional Software configuration window from the notification
2.545
And
I shutdown Tails and wait for the computer to power off
18.107
And
I start Tails from USB drive "__internal" with network unplugged
37.214
And
I enable persistence
9.717
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
11.546
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.215
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.033
And
the network is plugged
0.015
Then
the Additional Software upgrade service has started
0.051
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.075