And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:22.237
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.515
And
I accept adding "cowsay" to Additional Software
3.676
And
Additional Software is correctly configured for package "cowsay"
0.603
And
I shutdown Tails and wait for the computer to power off
7.033
And
I start Tails from USB drive "__internal" with network unplugged
37.434
And
I enable persistence
10.240
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.055
And
I log in to a new session
10.563
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.231
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.033
And
I prepare the Additional Software upgrade process to fail
0.047
And
the network is plugged
0.018
And
available upgrades have been checked
2.150
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.447
And
I can open the Additional Software configuration window from the notification
2.513
And
I shutdown Tails and wait for the computer to power off
18.061
And
I start Tails from USB drive "__internal" with network unplugged
38.335
And
I enable persistence
10.790
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
10.803
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.235
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.054
And
the network is plugged
0.019
Then
the Additional Software upgrade service has started
0.055
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.086