And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:21.000
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.622
And
I accept adding "cowsay" to Additional Software
3.803
And
Additional Software is correctly configured for package "cowsay"
0.627
And
I shutdown Tails and wait for the computer to power off
4.202
And
I start Tails from USB drive "__internal" with network unplugged
38.291
And
I enable persistence
9.384
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.062
And
I log in to a new session
10.407
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.253
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.063
And
I prepare the Additional Software upgrade process to fail
0.045
And
the network is plugged
0.019
And
available upgrades have been checked
2.158
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.491
And
I can open the Additional Software configuration window from the notification
2.549
And
I shutdown Tails and wait for the computer to power off
12.432
And
I start Tails from USB drive "__internal" with network unplugged
37.389
And
I enable persistence
9.960
And
I configure APT to prefer an old version of cowsay
0.008
And
I log in to a new session
11.412
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.191
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.071
And
the network is plugged
0.020
Then
the Additional Software upgrade service has started
0.057
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.062