And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.605
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.326
And
I accept adding "cowsay" to Additional Software
3.694
And
Additional Software is correctly configured for package "cowsay"
0.630
And
I shutdown Tails and wait for the computer to power off
8.371
And
I start Tails from USB drive "__internal" with network unplugged
35.648
And
I enable persistence
9.199
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.051
And
I log in to a new session
8.678
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.211
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.042
And
I prepare the Additional Software upgrade process to fail
0.049
And
the network is plugged
0.014
And
available upgrades have been checked
1.112
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.508
And
I can open the Additional Software configuration window from the notification
2.487
And
I shutdown Tails and wait for the computer to power off
17.556
And
I start Tails from USB drive "__internal" with network unplugged
36.099
And
I enable persistence
9.005
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
10.161
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.612
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.040
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.066
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.059