And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:16.821
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.327
And
I accept adding "cowsay" to Additional Software
3.867
And
Additional Software is correctly configured for package "cowsay"
0.662
And
I shutdown Tails and wait for the computer to power off
8.448
And
I start Tails from USB drive "__internal" with network unplugged
36.046
And
I enable persistence
8.742
And
I configure APT to prefer an old version of cowsay
0.019
And
I disable the tails-virt-notify-user.service user unit
0.059
And
I log in to a new session
10.055
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.191
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
I prepare the Additional Software upgrade process to fail
0.047
And
the network is plugged
0.018
And
available upgrades have been checked
2.145
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.461
And
I can open the Additional Software configuration window from the notification
2.520
And
I shutdown Tails and wait for the computer to power off
8.193
And
I start Tails from USB drive "__internal" with network unplugged
36.322
And
I enable persistence
8.926
And
I configure APT to prefer an old version of cowsay
0.008
And
I log in to a new session
9.758
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.177
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.055
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.102