And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:27.196
And
I configure APT to prefer an old version of cowsay
0.009
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.983
And
I accept adding "cowsay" to Additional Software
4.972
And
Additional Software is correctly configured for package "cowsay"
0.602
And
I shutdown Tails and wait for the computer to power off
7.341
And
I start Tails from USB drive "__internal" with network unplugged
39.268
And
I enable persistence
10.807
And
I configure APT to prefer an old version of cowsay
0.009
And
I disable the tails-virt-notify-user.service user unit
0.061
And
I log in to a new session
12.079
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.185
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.042
And
I prepare the Additional Software upgrade process to fail
0.050
And
the network is plugged
0.018
And
available upgrades have been checked
2.177
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.010
And
I can open the Additional Software configuration window from the notification
2.601
And
I shutdown Tails and wait for the computer to power off
22.600
And
I start Tails from USB drive "__internal" with network unplugged
38.755
And
I enable persistence
11.232
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
12.047
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.214
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
the network is plugged
0.020
Then
the Additional Software upgrade service has started
0.056
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.080