And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:25.346
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.030
And
I accept adding "cowsay" to Additional Software
5.016
And
Additional Software is correctly configured for package "cowsay"
0.766
And
I shutdown Tails and wait for the computer to power off
8.562
And
I start Tails from USB drive "__internal" with network unplugged
40.266
And
I enable persistence
11.358
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.052
And
I log in to a new session
11.178
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.615
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.038
And
I prepare the Additional Software upgrade process to fail
0.081
And
the network is plugged
0.114
And
available upgrades have been checked
3.224
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.458
And
I can open the Additional Software configuration window from the notification
2.606
And
I shutdown Tails and wait for the computer to power off
17.650
And
I start Tails from USB drive "__internal" with network unplugged
39.419
And
I enable persistence
11.495
And
I configure APT to prefer an old version of cowsay
0.014
And
I log in to a new session
11.335
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.204
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.057
And
the network is plugged
0.014
Then
the Additional Software upgrade service has started
0.055
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.060