And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:20.459
And
I configure APT to prefer an old version of cowsay
0.007
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.812
And
I accept adding "cowsay" to Additional Software
6.069
And
Additional Software is correctly configured for package "cowsay"
0.782
And
I shutdown Tails and wait for the computer to power off
8.039
And
I start Tails from USB drive "__internal" with network unplugged
36.843
And
I enable persistence
9.610
And
I configure APT to prefer an old version of cowsay
0.007
And
I disable the tails-virt-notify-user.service user unit
0.084
And
I log in to a new session
10.372
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.199
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.065
And
I prepare the Additional Software upgrade process to fail
0.047
And
the network is plugged
0.016
And
available upgrades have been checked
1.147
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.975
And
I can open the Additional Software configuration window from the notification
2.560
And
I shutdown Tails and wait for the computer to power off
17.539
And
I start Tails from USB drive "__internal" with network unplugged
38.155
And
I enable persistence
10.713
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
10.293
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.489
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.045
And
the network is plugged
0.013
Then
the Additional Software upgrade service has started
0.057
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.062