And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:21.948
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.478
And
I accept adding "cowsay" to Additional Software
4.917
And
Additional Software is correctly configured for package "cowsay"
0.650
And
I shutdown Tails and wait for the computer to power off
7.933
And
I start Tails from USB drive "__internal" with network unplugged
36.425
And
I enable persistence
9.610
And
I configure APT to prefer an old version of cowsay
0.007
And
I disable the tails-virt-notify-user.service user unit
0.064
And
I log in to a new session
10.033
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.214
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.060
And
I prepare the Additional Software upgrade process to fail
0.041
And
the network is plugged
0.022
And
available upgrades have been checked
3.216
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.445
And
I can open the Additional Software configuration window from the notification
2.567
And
I shutdown Tails and wait for the computer to power off
22.924
And
I start Tails from USB drive "__internal" with network unplugged
37.058
And
I enable persistence
10.525
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
10.472
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.229
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.048
And
the network is plugged
0.017
Then
the Additional Software upgrade service has started
0.059
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.054