And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:20.920
And
I configure APT to prefer an old version of cowsay
0.009
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.684
And
I accept adding "cowsay" to Additional Software
5.010
And
Additional Software is correctly configured for package "cowsay"
0.876
And
I shutdown Tails and wait for the computer to power off
8.173
And
I start Tails from USB drive "__internal" with network unplugged
38.122
And
I enable persistence
10.564
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.059
And
I log in to a new session
12.091
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.202
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.058
And
I prepare the Additional Software upgrade process to fail
0.076
And
the network is plugged
0.059
And
available upgrades have been checked
1.100
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.437
And
I can open the Additional Software configuration window from the notification
2.568
And
I shutdown Tails and wait for the computer to power off
8.366
And
I start Tails from USB drive "__internal" with network unplugged
38.910
And
I enable persistence
11.122
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
12.692
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.228
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
the network is plugged
0.017
Then
the Additional Software upgrade service has started
0.072
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.068