And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:23.362
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.714
And
I accept adding "cowsay" to Additional Software
4.778
And
Additional Software is correctly configured for package "cowsay"
0.640
And
I shutdown Tails and wait for the computer to power off
8.217
And
I start Tails from USB drive "__internal" with network unplugged
36.586
And
I enable persistence
10.313
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.077
And
I log in to a new session
9.688
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.243
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.045
And
I prepare the Additional Software upgrade process to fail
0.042
And
the network is plugged
0.016
And
available upgrades have been checked
1.144
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.009
And
I can open the Additional Software configuration window from the notification
2.557
And
I shutdown Tails and wait for the computer to power off
17.280
And
I start Tails from USB drive "__internal" with network unplugged
36.700
And
I enable persistence
9.974
And
I configure APT to prefer an old version of cowsay
0.013
And
I log in to a new session
10.853
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.547
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
the network is plugged
0.014
Then
the Additional Software upgrade service has started
0.054
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.061