And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:20.924
And
I configure APT to prefer an old version of cowsay
0.007
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.535
And
I accept adding "cowsay" to Additional Software
3.747
And
Additional Software is correctly configured for package "cowsay"
0.591
And
I shutdown Tails and wait for the computer to power off
4.070
And
I start Tails from USB drive "__internal" with network unplugged
37.125
And
I enable persistence
9.788
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.067
And
I log in to a new session
10.790
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.176
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.030
And
I prepare the Additional Software upgrade process to fail
0.042
And
the network is plugged
0.018
And
available upgrades have been checked
1.092
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.483
And
I can open the Additional Software configuration window from the notification
2.497
And
I shutdown Tails and wait for the computer to power off
17.254
And
I start Tails from USB drive "__internal" with network unplugged
37.653
And
I enable persistence
10.383
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
11.136
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.280
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.042
And
the network is plugged
0.015
Then
the Additional Software upgrade service has started
0.081
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.073