And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:16.394
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.345
And
I accept adding "cowsay" to Additional Software
3.662
And
Additional Software is correctly configured for package "cowsay"
0.628
And
I shutdown Tails and wait for the computer to power off
7.876
And
I start Tails from USB drive "__internal" with network unplugged
35.492
And
I enable persistence
8.950
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.064
And
I log in to a new session
9.509
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.550
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
I prepare the Additional Software upgrade process to fail
0.046
And
the network is plugged
0.018
And
available upgrades have been checked
1.091
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.961
And
I can open the Additional Software configuration window from the notification
2.570
And
I shutdown Tails and wait for the computer to power off
18.439
And
I start Tails from USB drive "__internal" with network unplugged
35.335
And
I enable persistence
9.146
And
I configure APT to prefer an old version of cowsay
0.008
And
I log in to a new session
10.051
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.211
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.040
And
the network is plugged
0.018
Then
the Additional Software upgrade service has started
0.054
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.068