And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.124
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.521
And
I accept adding "cowsay" to Additional Software
3.658
And
Additional Software is correctly configured for package "cowsay"
0.533
And
I shutdown Tails and wait for the computer to power off
7.868
And
I start Tails from USB drive "__internal" with network unplugged
35.816
And
I enable persistence
9.647
And
I configure APT to prefer an old version of cowsay
0.009
And
I disable the tails-virt-notify-user.service user unit
0.051
And
I log in to a new session
8.219
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.179
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
I prepare the Additional Software upgrade process to fail
0.050
And
the network is plugged
0.013
And
available upgrades have been checked
0.050
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.474
And
I can open the Additional Software configuration window from the notification
2.522
And
I shutdown Tails and wait for the computer to power off
16.916
And
I start Tails from USB drive "__internal" with network unplugged
35.664
And
I enable persistence
9.063
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
9.814
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.169
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
the network is plugged
0.015
Then
the Additional Software upgrade service has started
0.056
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.051