And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:16.268
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.413
And
I accept adding "cowsay" to Additional Software
3.651
And
Additional Software is correctly configured for package "cowsay"
0.555
And
I shutdown Tails and wait for the computer to power off
7.931
And
I start Tails from USB drive "__internal" with network unplugged
35.260
And
I enable persistence
8.796
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.051
And
I log in to a new session
8.623
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.214
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
I prepare the Additional Software upgrade process to fail
0.044
And
the network is plugged
0.016
And
available upgrades have been checked
1.113
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.500
And
I can open the Additional Software configuration window from the notification
2.544
And
I shutdown Tails and wait for the computer to power off
17.163
And
I start Tails from USB drive "__internal" with network unplugged
35.339
And
I enable persistence
9.231
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
9.535
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.182
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.033
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.048
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.060