And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:16.315
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.336
And
I accept adding "cowsay" to Additional Software
3.761
And
Additional Software is correctly configured for package "cowsay"
0.609
And
I shutdown Tails and wait for the computer to power off
2.635
And
I start Tails from USB drive "__internal" with network unplugged
36.023
And
I enable persistence
8.850
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.069
And
I log in to a new session
9.482
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.221
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
I prepare the Additional Software upgrade process to fail
0.061
And
the network is plugged
0.018
And
available upgrades have been checked
1.106
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.451
And
I can open the Additional Software configuration window from the notification
2.504
And
I shutdown Tails and wait for the computer to power off
22.244
And
I start Tails from USB drive "__internal" with network unplugged
35.620
And
I enable persistence
9.043
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
10.335
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.164
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.065
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.050
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.050