And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:30.622
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.616
And
I accept adding "cowsay" to Additional Software
4.779
And
Additional Software is correctly configured for package "cowsay"
0.751
And
I shutdown Tails and wait for the computer to power off
7.390
And
I start Tails from USB drive "__internal" with network unplugged
39.317
And
I enable persistence
10.521
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.060
And
I log in to a new session
10.858
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.237
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.033
And
I prepare the Additional Software upgrade process to fail
0.051
And
the network is plugged
0.023
And
available upgrades have been checked
3.219
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.419
And
I can open the Additional Software configuration window from the notification
2.562
And
I shutdown Tails and wait for the computer to power off
17.660
And
I start Tails from USB drive "__internal" with network unplugged
38.903
And
I enable persistence
9.914
And
I configure APT to prefer an old version of cowsay
0.008
And
I log in to a new session
10.572
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.260
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.099
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.085