And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:19.844
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.943
And
I accept adding "cowsay" to Additional Software
5.266
And
Additional Software is correctly configured for package "cowsay"
0.665
And
I shutdown Tails and wait for the computer to power off
4.069
And
I start Tails from USB drive "__internal" with network unplugged
37.586
And
I enable persistence
9.657
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.055
And
I log in to a new session
10.337
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.569
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
I prepare the Additional Software upgrade process to fail
0.051
And
the network is plugged
0.019
And
available upgrades have been checked
1.114
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.494
And
I can open the Additional Software configuration window from the notification
2.522
And
I shutdown Tails and wait for the computer to power off
22.509
And
I start Tails from USB drive "__internal" with network unplugged
38.680
And
I enable persistence
10.665
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
10.157
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.201
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.058
And
the network is plugged
0.029
Then
the Additional Software upgrade service has started
0.045
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.063