And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:20.822
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.590
And
I accept adding "cowsay" to Additional Software
3.788
And
Additional Software is correctly configured for package "cowsay"
0.733
And
I shutdown Tails and wait for the computer to power off
4.348
And
I start Tails from USB drive "__internal" with network unplugged
37.329
And
I enable persistence
10.359
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.061
And
I log in to a new session
10.035
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.263
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
I prepare the Additional Software upgrade process to fail
0.059
And
the network is plugged
0.014
And
available upgrades have been checked
1.100
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.428
And
I can open the Additional Software configuration window from the notification
2.551
And
I shutdown Tails and wait for the computer to power off
13.403
And
I start Tails from USB drive "__internal" with network unplugged
37.367
And
I enable persistence
10.449
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
9.886
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.195
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.035
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.053
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.082