And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:23.060
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.714
And
I accept adding "cowsay" to Additional Software
3.664
And
Additional Software is correctly configured for package "cowsay"
0.645
And
I shutdown Tails and wait for the computer to power off
4.188
And
I start Tails from USB drive "__internal" with network unplugged
38.108
And
I enable persistence
10.655
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.066
And
I log in to a new session
10.747
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.232
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
I prepare the Additional Software upgrade process to fail
0.065
And
the network is plugged
0.021
And
available upgrades have been checked
2.147
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.507
And
I can open the Additional Software configuration window from the notification
2.643
And
I shutdown Tails and wait for the computer to power off
17.595
And
I start Tails from USB drive "__internal" with network unplugged
38.805
And
I enable persistence
9.536
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
11.978
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.186
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.057
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.081
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.067