And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.077
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.859
And
I accept adding "cowsay" to Additional Software
3.663
And
Additional Software is correctly configured for package "cowsay"
0.605
And
I shutdown Tails and wait for the computer to power off
4.018
And
I start Tails from USB drive "__internal" with network unplugged
35.944
And
I enable persistence
9.761
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.050
And
I log in to a new session
9.012
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.246
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.053
And
I prepare the Additional Software upgrade process to fail
0.037
And
the network is plugged
0.016
And
available upgrades have been checked
2.197
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.536
And
I can open the Additional Software configuration window from the notification
2.564
And
I shutdown Tails and wait for the computer to power off
17.166
And
I start Tails from USB drive "__internal" with network unplugged
36.194
And
I enable persistence
9.150
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
8.446
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.162
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.045
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.071