And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:23.242
And
I configure APT to prefer an old version of cowsay
0.007
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.976
And
I accept adding "cowsay" to Additional Software
5.327
And
Additional Software is correctly configured for package "cowsay"
0.654
And
I shutdown Tails and wait for the computer to power off
4.232
And
I start Tails from USB drive "__internal" with network unplugged
38.016
And
I enable persistence
10.373
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.054
And
I log in to a new session
10.066
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.245
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.034
And
I prepare the Additional Software upgrade process to fail
0.045
And
the network is plugged
0.013
And
available upgrades have been checked
2.175
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.516
And
I can open the Additional Software configuration window from the notification
2.563
And
I shutdown Tails and wait for the computer to power off
4.167
And
I start Tails from USB drive "__internal" with network unplugged
40.407
And
I enable persistence
12.000
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
10.004
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.242
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
the network is plugged
0.017
Then
the Additional Software upgrade service has started
0.066
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.079