And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:29.196
And
I configure APT to prefer an old version of cowsay
0.008
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.017
And
I accept adding "cowsay" to Additional Software
5.010
And
Additional Software is correctly configured for package "cowsay"
0.767
And
I shutdown Tails and wait for the computer to power off
4.244
And
I start Tails from USB drive "__internal" with network unplugged
40.537
And
I enable persistence
11.092
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.109
And
I log in to a new session
10.257
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.245
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.042
And
I prepare the Additional Software upgrade process to fail
0.056
And
the network is plugged
0.018
And
available upgrades have been checked
1.117
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.545
And
I can open the Additional Software configuration window from the notification
2.726
And
I shutdown Tails and wait for the computer to power off
19.698
And
I start Tails from USB drive "__internal" with network unplugged
39.822
And
I enable persistence
10.891
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
10.319
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.219
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.045
And
the network is plugged
0.014
Then
the Additional Software upgrade service has started
0.055
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.060