And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:19.736
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.532
And
I accept adding "cowsay" to Additional Software
4.912
And
Additional Software is correctly configured for package "cowsay"
0.820
And
I shutdown Tails and wait for the computer to power off
4.119
And
I start Tails from USB drive "__internal" with network unplugged
37.927
And
I enable persistence
9.487
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.061
And
I log in to a new session
9.354
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.661
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.040
And
I prepare the Additional Software upgrade process to fail
0.049
And
the network is plugged
0.013
And
available upgrades have been checked
2.216
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.532
And
I can open the Additional Software configuration window from the notification
2.545
And
I shutdown Tails and wait for the computer to power off
19.149
And
I start Tails from USB drive "__internal" with network unplugged
37.532
And
I enable persistence
10.549
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
9.942
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.204
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
the network is plugged
0.015
Then
the Additional Software upgrade service has started
0.096
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.063