And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.212
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.407
And
I accept adding "cowsay" to Additional Software
3.608
And
Additional Software is correctly configured for package "cowsay"
0.550
And
I shutdown Tails and wait for the computer to power off
4.152
And
I start Tails from USB drive "__internal" with network unplugged
36.426
And
I enable persistence
10.323
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.050
And
I log in to a new session
9.421
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.194
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
I prepare the Additional Software upgrade process to fail
0.050
And
the network is plugged
0.019
And
available upgrades have been checked
2.198
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.488
And
I can open the Additional Software configuration window from the notification
2.514
And
I shutdown Tails and wait for the computer to power off
18.429
And
I start Tails from USB drive "__internal" with network unplugged
35.857
And
I enable persistence
10.134
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
9.356
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.176
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.040
And
the network is plugged
0.035
Then
the Additional Software upgrade service has started
0.078
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.061