And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:21.383
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.336
And
I accept adding "cowsay" to Additional Software
4.769
And
Additional Software is correctly configured for package "cowsay"
0.575
And
I shutdown Tails and wait for the computer to power off
4.097
And
I start Tails from USB drive "__internal" with network unplugged
39.134
And
I enable persistence
10.496
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.069
And
I log in to a new session
8.790
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.205
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
I prepare the Additional Software upgrade process to fail
0.038
And
the network is plugged
0.016
And
available upgrades have been checked
2.238
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.992
And
I can open the Additional Software configuration window from the notification
2.540
And
I shutdown Tails and wait for the computer to power off
18.885
And
I start Tails from USB drive "__internal" with network unplugged
37.857
And
I enable persistence
10.452
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
10.712
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.246
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
the network is plugged
0.014
Then
the Additional Software upgrade service has started
0.058
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.067