And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.920
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.970
And
I accept adding "cowsay" to Additional Software
3.653
And
Additional Software is correctly configured for package "cowsay"
0.593
And
I shutdown Tails and wait for the computer to power off
4.284
And
I start Tails from USB drive "__internal" with network unplugged
37.876
And
I enable persistence
9.230
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.045
And
I log in to a new session
9.703
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.214
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
I prepare the Additional Software upgrade process to fail
0.046
And
the network is plugged
0.015
And
available upgrades have been checked
1.105
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.047
And
I can open the Additional Software configuration window from the notification
2.619
And
I shutdown Tails and wait for the computer to power off
13.141
And
I start Tails from USB drive "__internal" with network unplugged
37.147
And
I enable persistence
9.662
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
10.649
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.212
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
the network is plugged
0.017
Then
the Additional Software upgrade service has started
0.079
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.092