And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:23.212
And
I configure APT to prefer an old version of cowsay
0.011
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.503
And
I accept adding "cowsay" to Additional Software
5.034
And
Additional Software is correctly configured for package "cowsay"
0.779
And
I shutdown Tails and wait for the computer to power off
4.110
And
I start Tails from USB drive "__internal" with network unplugged
39.420
And
I enable persistence
11.614
And
I configure APT to prefer an old version of cowsay
0.028
And
I disable the tails-virt-notify-user.service user unit
0.097
And
I log in to a new session
10.549
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.253
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.083
And
I prepare the Additional Software upgrade process to fail
0.059
And
the network is plugged
0.015
And
available upgrades have been checked
1.147
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.097
And
I can open the Additional Software configuration window from the notification
2.537
And
I shutdown Tails and wait for the computer to power off
19.065
And
I start Tails from USB drive "__internal" with network unplugged
41.043
And
I enable persistence
11.183
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
12.059
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.185
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.032
And
the network is plugged
0.018
Then
the Additional Software upgrade service has started
0.047
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.068