And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:19.519
And
I configure APT to prefer an old version of cowsay
0.008
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.954
And
I accept adding "cowsay" to Additional Software
4.962
And
Additional Software is correctly configured for package "cowsay"
0.665
And
I shutdown Tails and wait for the computer to power off
4.073
And
I start Tails from USB drive "__internal" with network unplugged
36.804
And
I enable persistence
9.311
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.070
And
I log in to a new session
10.271
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.219
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.059
And
I prepare the Additional Software upgrade process to fail
0.054
And
the network is plugged
0.013
And
available upgrades have been checked
0.049
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.084
And
I can open the Additional Software configuration window from the notification
2.547
And
I shutdown Tails and wait for the computer to power off
18.743
And
I start Tails from USB drive "__internal" with network unplugged
38.507
And
I enable persistence
10.045
And
I configure APT to prefer an old version of cowsay
0.007
And
I log in to a new session
9.814
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.241
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
the network is plugged
0.015
Then
the Additional Software upgrade service has started
0.056
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.075