And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.450
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.541
And
I accept adding "cowsay" to Additional Software
3.627
And
Additional Software is correctly configured for package "cowsay"
0.585
And
I shutdown Tails and wait for the computer to power off
4.277
And
I start Tails from USB drive "__internal" with network unplugged
37.362
And
I enable persistence
9.640
And
I configure APT to prefer an old version of cowsay
0.008
And
I disable the tails-virt-notify-user.service user unit
0.063
And
I log in to a new session
8.850
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.293
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.038
And
I prepare the Additional Software upgrade process to fail
0.052
And
the network is plugged
0.020
And
available upgrades have been checked
2.179
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.601
And
I can open the Additional Software configuration window from the notification
2.612
And
I shutdown Tails and wait for the computer to power off
13.300
And
I start Tails from USB drive "__internal" with network unplugged
37.304
And
I enable persistence
9.700
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
9.858
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.216
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
the network is plugged
0.013
Then
the Additional Software upgrade service has started
0.059
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.070