And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:26.675
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.174
And
I accept adding "cowsay" to Additional Software
4.934
And
Additional Software is correctly configured for package "cowsay"
0.672
And
I shutdown Tails and wait for the computer to power off
4.577
And
I start Tails from USB drive "__internal" with network unplugged
39.576
And
I enable persistence
10.793
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.060
And
I log in to a new session
10.320
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.288
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
I prepare the Additional Software upgrade process to fail
0.046
And
the network is plugged
0.014
And
available upgrades have been checked
2.190
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.043
And
I can open the Additional Software configuration window from the notification
2.516
And
I shutdown Tails and wait for the computer to power off
14.132
And
I start Tails from USB drive "__internal" with network unplugged
39.969
And
I enable persistence
9.371
And
I configure APT to prefer an old version of cowsay
0.007
And
I log in to a new session
10.717
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.215
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.059
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.045
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.101