And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:11.055
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.184
And
I accept adding "cowsay" to Additional Software
4.135
And
Additional Software is correctly configured for package "cowsay"
0.508
And
I shutdown Tails and wait for the computer to power off
3.984
And
I start Tails from USB drive "__internal" with network unplugged
31.666
And
I enable persistence
10.487
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.044
And
I log in to a new session
7.165
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.162
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.040
And
I prepare the Additional Software upgrade process to fail
0.045
And
the network is plugged
0.024
And
available upgrades have been checked
0.039
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.523
And
I can open the Additional Software configuration window from the notification
2.504
And
I shutdown Tails and wait for the computer to power off
2.521
And
I start Tails from USB drive "__internal" with network unplugged
32.378
And
I enable persistence
10.380
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
7.749
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.152
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.025
And
the network is plugged
0.029
Then
the Additional Software upgrade service has started
0.039
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.058