And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:14.440
And
I configure APT to prefer an old version of cowsay
0.009
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.733
And
I accept adding "cowsay" to Additional Software
4.845
And
Additional Software is correctly configured for package "cowsay"
0.571
And
I shutdown Tails and wait for the computer to power off
3.955
And
I start Tails from USB drive "__internal" with network unplugged
33.153
And
I enable persistence
11.081
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.052
And
I log in to a new session
7.225
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.179
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.033
And
I prepare the Additional Software upgrade process to fail
0.051
And
the network is plugged
0.028
And
available upgrades have been checked
2.163
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.435
And
I can open the Additional Software configuration window from the notification
2.394
And
I shutdown Tails and wait for the computer to power off
14.024
And
I start Tails from USB drive "__internal" with network unplugged
33.309
And
I enable persistence
13.170
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
7.551
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.200
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
the network is plugged
0.028
Then
the Additional Software upgrade service has started
0.058
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.076