And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.020
And
I configure APT to prefer an old version of cowsay
0.018
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.556
And
I accept adding "cowsay" to Additional Software
4.842
And
Additional Software is correctly configured for package "cowsay"
0.535
And
I shutdown Tails and wait for the computer to power off
3.986
And
I start Tails from USB drive "__internal" with network unplugged
35.074
And
I enable persistence
11.441
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.046
And
I log in to a new session
7.691
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.186
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
I prepare the Additional Software upgrade process to fail
0.049
And
the network is plugged
0.024
And
available upgrades have been checked
2.136
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.393
And
I can open the Additional Software configuration window from the notification
2.651
And
I shutdown Tails and wait for the computer to power off
18.030
And
I start Tails from USB drive "__internal" with network unplugged
33.721
And
I enable persistence
11.715
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
8.224
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.142
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
the network is plugged
0.024
Then
the Additional Software upgrade service has started
0.058
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.067