And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.201
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.830
And
I accept adding "cowsay" to Additional Software
3.624
And
Additional Software is correctly configured for package "cowsay"
0.572
And
I shutdown Tails and wait for the computer to power off
4.060
And
I start Tails from USB drive "__internal" with network unplugged
36.136
And
I enable persistence
9.114
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.081
And
I log in to a new session
8.955
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.189
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
I prepare the Additional Software upgrade process to fail
0.045
And
the network is plugged
0.014
And
available upgrades have been checked
1.118
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.471
And
I can open the Additional Software configuration window from the notification
2.516
And
I shutdown Tails and wait for the computer to power off
16.942
And
I start Tails from USB drive "__internal" with network unplugged
36.275
And
I enable persistence
8.952
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
9.240
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.183
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
the network is plugged
0.015
Then
the Additional Software upgrade service has started
0.036
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.060