And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:22.302
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.401
And
I accept adding "cowsay" to Additional Software
4.900
And
Additional Software is correctly configured for package "cowsay"
0.624
And
I shutdown Tails and wait for the computer to power off
4.115
And
I start Tails from USB drive "__internal" with network unplugged
36.347
And
I enable persistence
8.985
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.048
And
I log in to a new session
9.468
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.257
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
I prepare the Additional Software upgrade process to fail
0.043
And
the network is plugged
0.015
And
available upgrades have been checked
2.147
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.463
And
I can open the Additional Software configuration window from the notification
2.541
And
I shutdown Tails and wait for the computer to power off
13.496
And
I start Tails from USB drive "__internal" with network unplugged
37.374
And
I enable persistence
10.248
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
10.551
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.240
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
the network is plugged
0.020
Then
the Additional Software upgrade service has started
0.055
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.055