And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.845
And
I configure APT to prefer an old version of cowsay
0.007
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.677
And
I accept adding "cowsay" to Additional Software
2.448
And
Additional Software is correctly configured for package "cowsay"
0.682
And
I shutdown Tails and wait for the computer to power off
3.900
And
I start Tails from USB drive "__internal" with network unplugged
34.008
And
I enable persistence
12.383
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.042
And
I log in to a new session
8.329
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.317
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.035
And
I prepare the Additional Software upgrade process to fail
0.048
And
the network is plugged
0.041
And
available upgrades have been checked
2.147
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.753
And
I can open the Additional Software configuration window from the notification
2.375
And
I shutdown Tails and wait for the computer to power off
18.065
And
I start Tails from USB drive "__internal" with network unplugged
34.987
And
I enable persistence
11.827
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
8.785
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.246
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
the network is plugged
0.039
Then
the Additional Software upgrade service has started
0.042
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.056