And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.720
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
6.012
And
I accept adding "cowsay" to Additional Software
4.996
And
Additional Software is correctly configured for package "cowsay"
0.530
And
I shutdown Tails and wait for the computer to power off
4.160
And
I start Tails from USB drive "__internal" with network unplugged
34.311
And
I enable persistence
10.982
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.046
And
I log in to a new session
8.489
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.204
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
I prepare the Additional Software upgrade process to fail
0.037
And
the network is plugged
0.037
And
available upgrades have been checked
0.039
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.746
And
I can open the Additional Software configuration window from the notification
2.405
And
I shutdown Tails and wait for the computer to power off
18.061
And
I start Tails from USB drive "__internal" with network unplugged
33.347
And
I enable persistence
10.983
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
9.010
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.171
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.058
And
the network is plugged
0.028
Then
the Additional Software upgrade service has started
0.047
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.052